Graphtec America: Cutting Plotters, Vinyl Cutters, InkJet Printers, Wide Format Image Scanners, Data Loggers, Acquisition platforms, Electronic Testing Instruments, Craft Robo


			Dealer Locator

BACK TO GRAPHTEC AMERICA

l

l

l

l

•

Craft ROBO Specs.

Craft ROBO System Requirements and Software Included

Craft ROBO CC330L-20 includes a CD-ROM with a Windows printer driver and controller up to Windows Vista 64bit, ROBO Master design program, and Cutting Master 2 (a Plug-in for Adobe Illustrator 8 through CS4 for Windows; Illustrator 10 - Illustrator CS4 on Mac *). Users can download a free update of Cutting Master 2 from CraftROBOstore.com by GRAPHTEC America.

*Mac users must have a complete version of Adobe Illustrator to use the Craft ROBO. Graphtec America provides the free plug-in to Adobe Illustrator.

The NEW CC330L-20 has a removable media slot for SD Cards. Removable SD Card* allows you to cut on the go without use of a PC!
*SD Card not included. Reads 2GB SD Card Maximum.
Not SDHC Compatible.

Support downloads also available @ www.graphtecamerica.com/support

Cutting Master 2 for Craft ROBO is a plug-in for Adobe Illustrator 10 through CS4 and CorelDRAW 10 through X4 on Windows 2000/XP/Vista/7.

On Mac OSX, Cutting Master 2 works with Adobe Illustrator 10 through CS4 running on OSX 10.2.8 through 10.6 and PowerPC G4/G5 or Mac Intel models.

Windows Operating System Requirements

•	Windows Operating System: Windows 98SE/ME/2000/XP/Vista/7
•	CPU: Pentium III 600 MHz or higher
•	RAM Memory: 128 MB or more (at least 256 MB recommended)
•	Monitor: 1024 x 768 High color (True Color recommended)
•	USB Port (2.0 compatible)
•	Mouse
•	CD-ROM drive
•	Supported printers: Windows-compatible printers

•	Included on the CD: Windows printer driver and controller, ROBO Master design program and Cutting Master 2 ROBO for Windows Adobe Illustrator version 8 through CS4.
•	Free Download for Windows Adobe Illustrator CS3 users: Cutting Master 2 plug-in for CS4.
•	Free Download for Windows Illustrator or CORELDraw users: Cutting Cutting Master 2 ROBO plug-in for Adobe Illustrator 8 through CS4 and CorelDRAW 10 through X4.

Mac OSX System Requirements

*Mac users must have a complete version of Adobe Illustrator to use the Craft ROBO. Graphtec America provides a free plug-in to Adobe Illustrator called Cutting Master 2 ROBO.

•	Mac OSX Operating System: 10.2.8 through 10.6
•	CPU: G4/G5 or Intel Core processors
•	RAM Memory: 128 MB or more (at least 256 MB recommended)
•	Monitor: 1024 x 768 or higher, Millions of Colors
•	USB Port (2.0 compatible)
•	Mouse
•	CD-ROM drive
•	Supported printers: Mac OSX compatible printers

•	Free Download for Mac OSX Adobe Illustrator 10 through CS4 users: Cutting Master 2 ROBO plug-in for Illustrator 10 through CS4. Design, print and cut directly from an Illustrator layout.

View these PDF files to learn more about Craft ROBO

Craft ROBO CC330L-20 Quick Application Guide 8.4MB

Craft ROBO CC330L-20 User's Manual 6.6MB

Craft ROBO CC330L-20 Brochure/Spec Sheet 2.6MB

The package includes:

•	1 Craft ROBO CC330L-20
•	1 external power supply (100~240VAC 1.2A input /24VDC 2.0A out)
•	1 blade holder with 3 blade caps (0.1mm, 0.2mm, 0.3mm)
•	1 6 foot USB cable
•	1 Installation Guide
•	2 Carrier Sheets
•	1 Application Guide with instructions for three basic projects.
•	1 Software installation CD (ROBO Master, Craft ROBO Controller and driver, Adobe Illustrator® Plug-in Cutting Master ROBO)

Specifications

Motor Drive method

Stepper motor

Cutting Area

Maximum: 7.87 in x 39.37 in (200 mm x 1000 mm) in extended mode

Media Size	Standard: U.S. Letter Size 8.5 inches x 11 inches Maximum sheet size: 11 inches wide by 39.7 inches long Minimum without carrier sheet: US model 8.5 inches wide (216mm) *With a carrier sheet, smaller media sized can be cut. Recommended no smaller than approximately 3 x 4 inches.
Maximum cutting force	230 gf
Operating Speed	3.93 in/sec (100 mm/s)
Ball Point Pen Holder	Available but not included
1 Blade Holder, 3 Adjustment Caps
Suitable Media types	from thin films such as vinyl, sticker, decal, image transfer, to (except for high reflective sheets) Media 0.1 mm (0.004 inch) or less in thickness, up to 0.3 mm (0.012 inch ) or less (including the carrier sheet), Kent paper (157 g/m2). Note: Not all types of media can be cut.
SD Card slot	Read only. Max. 2GB (Not SDHC compatible) Not included
Interface	USB 2.0
Dedicated Power Supply	Input: AC100-240V - Output: DC +24V (1.875 A)
Power consumption	25W (10W or less in standby)
Operating Environment	60° to 90° F (16° to 33° C) 35 to 70% RH non-condensing
External dimensions (W×D×H) Inches (mm)	Approx. 16.53 inch x 4.4 inch x 4.4 inch
Weight Pounds/Kg	Approx. 4.4 lbs. (3.2 kg)